Journal Articles (8)
- 1. Shithi Dey Kanka, Md. Golam Kibria, Usma Atiua Anika , Barun K. Das , Md. Sanowar Hossain , Dibyendu Roy , Md. Shahriar Mohtasim; "Impact of various environmental parameters and production enhancement techniques on direct solar still: A review", Solar Energy Volume 267, 1 January 2024, 112216, 2024
- 2. Md. Sanowar Hossain, Miftahul Mobin Chowdhury, Barun K. Das, Mohammad Rofiqul Islam, Md. Golam Kibria, Sujan Banik; "A Sustainable Energy Approach for Pumping and Irrigation in the Barind Region of Bangladesh", Clean Technologies and Environmental Policy, 2024
- 3. Md Golam Kibria, Md Shahriar Mohtasim, Utpol K. Paul, Barun K. Das, R. Saidur; "Impact of hybrid nano PCM (paraffin wax with Al2O3 and ZnO nanoparticles) on photovoltaic thermal system: Energy, exergy, exergoeconomic and enviroeconomic analysis", Journal of Cleaner Production Available online 3 January 2024, 140577, 2024
- 4. Md. Golam Kibria ,*, Utpol K. Paul , Ashik Hasan , Md. Shahriar Mohtasim , Barun K. Das , Monjur Mourshed; "Current prospects and challenges for biomass energy conversion in Bangladesh: Attaining sustainable development goals", Biomass and Bioenergy 183 (2024) 107139, 2024
- 5. Usma Atiua Anika, Md. Golam Kibria*, Shithi Dey Kanka , Md. Shahriar Mohtasim , Utpol K. Paul , Barun K. Das; "Exergy, exergo-economic, environmental and sustainability analysis of pyramid solar still integrated hybrid nano-PCM, black sand, and sponge", Solar Energy 274 (2024) 112559, 2024
- 6. Mim Mashrur Ahmed, Barun K. Das, Pronob Das, Md Sanowar Hossain, Md Golam Kibria; "Energy management and sizing of a stand-alone hybrid renewable energy system for community electricity, fresh water, and cooking gas demands of a remote island", Journal- Energy Conversion and Management ;Volume 299; Pages 117865; Publisher Elsevier, 2024
- 7. Md. Golam Kibria, Nahid Imtiaz Masuk, Rafat Safayet, Huy Quoc Nguyen & Monjur Mourshed; "Plastic Waste: Challenges and Opportunities to Mitigate Pollution and Effective Management", International Journal of Environmental Research, Springer, 2023
- 8. Md. Sanowar Hossain ,Nahid Imtiaz Masuk , Barun K. Das, Arnob Das , Md. Golam Kibria , Miftahul Mobin Chowdhury , Imtiaz Ahmed Shozib; "Theoretical estimation of energy potential and environmental emissions mitigation for major livestock manure in Bangladesh", ELSEVIER, Renewable Energy Volume 217, November 2023, 119354, 2023
Conference Papers (8)
- 1. Md Kamrul Hasan and Md.Golam Kibria; "Effect of Discharge current on the capacity of lead acid battery", 7 th International Conference on Engineering Research, Innovation and Education, ICERIE-2023., 2023
- 2. Md. Golam Kibria,* , Sakin Mahamud , N. M. Morshedul Hoque , Asma-UL-Husna, Md Rabiul Islam Sarker , Mohd. Rafiqul Alam Beg; "Experimental Investigation of a PVT System Using PCM", International Conference on Mechanical, Industrial and Energy Engineering 2022 22-24 December, 2022, Khulna, BANGLADESH, 2022
- 3. Md. Afraim Al Hasan, Md. Golam Kibria and Mohammad U.H. Joardder (Omar); "Numerical & experimental evaluation of the performance of Celdek as a cooling pad material", International Conference on Mechanical Engineering and Renewable Energy 2021 Chittagong University of Engineering & Technology (CUET) Chattogram, Bangladesh, December 12-14, 2021, 2021
- 4. M. G. Kibria, F. Rashid, M. Shahadat; "Design, Fabrication and Performance Analysis of a Voice Coil Motor Using Different Input Signal", 2019 IEEE International Conference on Signal Processing, Information, Communication & Systems (SPICSCON), 2019
- 5. M. S. Hossain, M.G. kibria, A.M. Parvej, M.R. Islam; "Production and characterization of pyrolytic oil derived from co-pyrolysis of solid polythene waste and saw dust", Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019) 11 – 13 December, 2019, Chittagong, Bangladesh, 2019
- 6. M.G. Kibria, B.K. Das, R.A. Beg, A. Chakravartty; "Assessment of Biogas Generation From Cattle Dung In Bangladesh", Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019) 11 – 13 December, 2019, Chittagong, Bangladesh, 2019
- 7. Md. Golam Kibria, Prosenzit Kumar, Md. Sanowar Hossain, Md. Arman Arefin; "Leaf Spring for Light Vehicle: Comparison Among Conventional Steel, Composite Materials (Epoxy-E Carbon & Epoxy-E Glass) By Anays Workbench", International Conference on Mechanical, Industrial and Materials Engineering 2019 (ICMIME2019) 17-19 December, 2019, RUET, Rajshahi, Bangladesh., 2019
- 8. Mhia Md Zaglul Shahadat, Md Golam Kibria, Md Monnaf Ali; "Performance Analysis of a Fabricated Distinct Voice Coil Motor", International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, RUET, Rajshahi, Bangladesh., 2017